banner image

Industries Aramid, UHMWPE, PVC Coating Yarn, Tire Cord

Precision Cross Winder
Model: DS 10

The precision cross winder DS 10 can be used for rewinding and folding of synthetic threads and for yarns made of natural fibres. Because of the wide choice of material specific thread guides, you can use this machine in a yarn count range from 20 up to 20 000 dtex.

According to the machine equipment, you can produce cylindrical or conical bobbins. The winding positions are arranged in groups of 2 or 3 in separate frames. You can assemble production lines including up to 10 networked winding positions from these frames. The compact design permits operation even in a confined space.

The machine is designed for permanent operation. The modular design allows us to adapt the machine exactly to your individual production requirements.

Basic equipment:
Central operation terminal with touch screen and intuitive visualised program operation. Check the actual production parameters of the individual winding positions or a summary of the whole line. You also can set winding parameters and create and administer winding receipts. This results in short setting-up times.
Dancer control for constant yarn tension and winding speed.
Automatic winding stop at reaching a defined diameter or yardage.
Electronic controlled and programmable diameter depending crossing ratio.
Electronic controlled yarn tension, programmable for up to 5 diameter steps over the bobbin build.
Pneumatic winding mandrels for a quick bobbin swap.
Pneumatic reverse lock for a proper bobbin build-up.
Electronic yarn stop motion.
Pneumatic contact pressure control.
Automatic generation of a programmable yarn reserve.

Precision Cross Winder
Model: DS 10

The precision cross winder DS 10 M can be used for rewinding and folding of synthetic threads and for yarns made of natural fibres. Because of the wide choice of material specific thread guides, you can use this machine in a yarn count range from 20 up to 20 000 dtex.

According to the machine equipment, you can produce cylindrical or conical bobbins.

The winding positions arranged in groups of 2 or 3 in separate frames. You can assemble production lines including up to 20 networked winding positions from these frames. The compact design permits operation even in a confined space.

The machine is designed for permanent operation. The modular design allows us to adapt the machine exactly to your individual production.

Basic equipment:
Central operation terminal with touch screen and intuitive visualised program operation. Check the actual production parameters of the individual winding positions or a summary of the whole line. You also can set winding parameters and create and administer winding receipts. This results in short setting-up times.
Dancer control for constant yarn tension and speed.
Automatic winding stop at reaching a defined diameter or yardage.
Electronic controlled yarn tension, programmable for up to 5 diameter steps over the bobbin build.
Delivery device.
Adjustable crossing by conoid gear.
Pneumatic winding mandrels for a quick bobbin swap.
Pneumatic reverse lock for a proper bobbin build-up.
Electronic yarn stop motion.
Pneumatic contact pressure control

Precision Cross Winder
Model: DS 35

The precision cross winder DS 35 is an all-round machine and can be used for nearly every winding application. It is capable for winding, rewinding and folding of synthetic threads and for yarns made of natural fibres. Because of the wide choice of material specific thread guides, you can use this machine in a yarn count range from 20 up to 20 000 dtex. According to the machine equipment, you can produce cylindrical or conical bobbins. It is possible to assemble production lines including any number of winding positions. The compact design permits operation even in a confined space.

The machine is designed for permanent operation. The modular design allows us to adapt the machine exactly to your individual production requirements.

Basic equipment:
Operating terminal to check the actual winding status and for setting the production parameters.
Adjustment of the crossing ration by exchangeable pulleys.
Adjustment of the traversed thread distance according to the thread size by conoid drive.
Electronic yardage counter.
Fingerbrake for adjustable yarn tension.
Winding mandrels for quick bobbin swap. Winding is possible with or without winding tubes.
Reverse lock for proper package build-up.
Releasing contact pressure, adjustable over the package build-up.

Parallel Winder
Model: PM 1/E, PM 1/2E

The parallel winders of the type PM 1 are used for winding mono- and assembled monofilaments from PP, PA, PE or PES, for cables and for coated yarns as tyre cord. There are the basic types PM 1/E with only one winding mandrel for rewinding tasks or as PM 1/2E with two winding mandrels for take-up winding from extruder line.

The PM 1 is constructed according to its specific task. Because of the broad fields of application, there are machines with only one winding position for rewinding as well as production lines with up to 30 winding positions possible. The winding positions can be stacked in up to 3 levels for such a large line.

The PM 1/2 E equipped with two winding mandrels for inline use . It is therefore possible to hand over the thread from one to the other winding mandrel at full winding speed.

Basic equipment:
Central operation terminal with touch screen and intuitive visualised program operation. Check the actual production parameters of the individual winding positions or a summary of the whole line. You also can set winding parameters and create and administer winding receipts. This results in short setting-up times.
Dancer control for constant yarn tension and winding speed.
rn tension and winding speed.

Fully Automatic Presicion Cross Winder
Model: DS 352

The fully automatic precision cross winder DS 352 is used for winding and rewinding of textile or technical yarns in in- or offline production.

Because of the wide choice of material specific thread guides, you can use this machine in a yarn count range from 20 up to 25 000 dtex. The winding positions are arranged in individual frames with 1 or 2 winding positions. You can assemble networked production lines from these frames. The compact design permits operation even in a confined space.

The fully automatic bobbin swap is done at full production speed. It is possible to apply an adjustable yarn reserve automatically to each bobbin. The winding tubes are fed from a magazine at the back of the machine. The completed bobbins are also ejected to the back on a conveyor belt or a tray. The machine is designed for permanent operation. The modular design allows us to adapt the machine exactly to your individual production requirements.

Basic equipment:
Fully automatic bobbin swap at full production speed.
Central operation terminal with touch screen and intuitive visualised program operation. Check the actual production parameters of the individual winding positions or a summary of the whole line. You also can set winding parameters and create and administer winding receipts. This results in short setting-up times.
Dancer control for constant yarn tension and speed.
Electronic controlled and programmable diameter depending crossing ratio.
Precision winding and random winding possible.
Pneumatic winding mandrels for a quick bobbin swap.
Pneumatic reverse lock for a proper bobbin build-up.
Pneumatic contact pressure control.

Please feel free to contact our product expert if you have questions about our products. CONTACT US